The batteries can be arranged in different ways to get the voltage you’ll need for your power inverter. If you are using a 1000 watt at12 volt power inverter, you will need 2 units of 6 volts batteries connected in series to come up with the 12 volts.

The most dangerous part of this process is the liquid in the battery. The liquid is sulfuric acid that will seriously burn you. As a safety precocious, always have some baking soda nearby to neutralize the acid in case you spilled some on your body.

Another safety tip says that the gasses that come off from the battery, hydrogen gas (H2), can be hazardous as well. It is highly flammable. Make sure you work with the batteries in an open space and no sparks or open flame nearby.

The batteries can be arranged in different ways to get the voltage you’ll need for your power inverter. If you are using a 1000 watt at12 volt power inverter, you will need 2 units of 6 volts batteries connected in series to come up with the 12 volts.

The most dangerous part of this process is the liquid in the battery. The liquid is sulfuric acid that will seriously burn you. As a safety precocious, always have some baking soda nearby to neutralize the acid in case you spilled some on your body.

Another safety tip says that the gasses that come off from the battery, hydrogen gas (H2), can be hazardous as well. It is highly flammable. Make sure you work with the batteries in an open space and no sparks or open flame nearby.

Do you know what type of smoke detectors you have? Did you ever think if there are any differences in them? Yes, definitely there are. At the today’s market there are two main types of smoke detectors. Their common feature is a sensor that detects smoke and fire differently, depending on the origin of the fire:

• Ionization smoke detectors – they are more responsive to a flaming fire according to the National Fire Protection Association (NFPA). These alarms use “ions,” or electrically charged particles, to help detect smoke in the air.

Photoelectric smoke detectors – their main feature is that they are using a light beam to help detect the presence of smoke.

So, how to choose the appropriate detectors? The thing is that NFPA recommends to have both types as you don’t know which type of fire could erupt in your home. And, the detectors are useless if they do not work properly. According to NFPA, an estimated 24 percent of smoke alarms failures were caused by dead batteries between 2010 to 2016.

Please, be careful and inspect your smoke detectors regularly!